| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support |
| Surface Treatment: | Without Processing |
|
Still deciding? Get samples of US$ 3999/Piece
Request Sample
|
Suppliers with verified business licenses
1. for disassembling the DTH hammer
2. easy operation
3. low cost
4. for 5" to 10" hammers
5.It is made of high - quality carbon steel, ensuring a long service life and high impact resistance. This durable structure makes it suitable for the frequent use of various types of DTH hammer .
Manual:
The operation method as below:
1). Put hammer on the bench.
2). Adjust the position of the hammer and wrench; use wrench to block the top sub side of hammer; let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; use wrench to block the drive chuck of hammer; let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer.
| ITEM | |
| Standard Range | 5"-10" |
| Weight | 850 Kg |
| Shipping Weight | 900 Kg |
| Length | 1100 mm |
| Width | 1000 mm |
| Height | 1300 mm |
| Diesel engine power | 8.5 kW |
| Maximum Torque | 88000 Nm |
){kind=link}